Remote Access

With the WomoNET Cloud Link you open your WomoNET.core from anywhere at its own address. You sign in with your WomoNET account. Your WomoNET.core needs internet for this.

Setting up

Open the WomoNET.app.
Go to Settings → System → Remote access and tap Set up Cloud Link.
Tap Open sign-in page or scan the QR code. The code is valid for 15 minutes.
Sign in on remote.womonet.io with your WomoNET account and check that the code matches.
Give the WomoNET.core a name and tap Add core. After a few seconds the app shows Online.

Whoever confirms the code is the owner of the WomoNET.core.

Opening it from anywhere

Open the address from the app, or remote.womonet.io → My cores → Open. If it says offline there, your WomoNET.core has no internet at the moment.

As the owner, tap Create invite link under Manage access on remote.womonet.io and send the link or QR code. It is valid for 7 days, for one person.
The invited person needs their own WomoNET account and taps Accept.
Members can open the WomoNET.core and leave it again with Leave.
Only the owner removes members and can transfer ownership to a member.

Allowing WomoNET support

If you need help, switch on Allow WomoNET support in the app under Remote access. WomoNET support can then connect to your WomoNET.core through the Cloud Link. Switching it off also ends a support connection that is open at that moment. Your own remote access, access inside the vehicle and your own Tailscale network are not affected. As the owner, you see on remote.womonet.io under Manage access whether WomoNET support access is on.

Ending remote access

Only the owner ends remote access, on remote.womonet.io under Manage access → Remove remote access. A linked WomoNET.core cannot be set up again from inside the vehicle, so no guest on your WiFi can take it over.

Own Tailscale network